Customized: | Non-Customized |
---|---|
Structure: | Desktop |
Certification: | CE, ISO |
Suppliers with verified business licenses
Audited by an independent third-party inspection agency
Potential control range: ±10V | Current control range: ±5A |
Potential control accuracy: 0.1%×full range±1mV | Current control accuracy: 0.1%×full range |
Potential resolution: 10μV | Current sensitivity:10pA |
Potential rise time:<1μS(<10mA),<10μS(<5A) | Current range: 5A~200pA, 12 ranges |
Reference electrode input impedance: 1012Ω||20pF | Maximum current output: 5.0A |
Compliance voltage: ±13V | Current increment during scan:1mA @1A/mS |
CV and LSV scan rate: 0.001mV~10V/s | Potential increment during scan: 0.076mV @1V/mS |
CA and CC pulse width: 0.0001~65000s | DPV and NPV pulse width: 0.0001~1000s |
SWV frequency: 0.001~100KHz | Minimum potential increment in CV: 0.075mV |
AD data acquisition:16bit@1MHz,20bit @1kHz | Potential and current range: automatic |
DA resolution: 16bit, setup time: 1μs | Low-pass filters: covering 8-decade |
Communication Interface: USB | Instrument weight:8Kg |
Size (cm): 36.4(W) x 38.4(D) x 13.8 (H) | |
EIS | |
Signal generator | |
Frequency range:10μHz~1MHz | AC amplitude:1mV~2500mV |
Frequency accuracy:0.005% | DC Bias: -10V~+10V |
Output impedance:50Ω | Waveform: sine wave, triangular wave and square wave |
Wave distortion:<1% | Scanning mode: logarithmic/linear, increase/decrease |
Signal analyzer | |
Integral time: minimum:10ms or the longest time of a cycle Maximum:106 cycles or 105s | Measurement delay: 0~105 s |
DC compensation | |
Potential compensation range:-10V~+10V | Current compensation range:-1A~+1A |
Bandwidth: 8-decade frequency range, automatic and manual setting |