Suppliers with verified business licenses
Specifications |
Zero resistance Ammeter |
Floating GND |
Potential range: ±10V |
Maximum current: ±20mA |
Compliance voltage: ±11V |
Potentiostat rise time: <1ms,normally 0.8ms |
Potentiostat bandwidth(-3db): 1MHz |
Potential range: auto, ±2.5V,±5V,±10V |
Potential resolution: 0.1%×potential range |
Potential control accuracy: 0.1% × full range |
Potential noise: <10mV rms |
Current range: ±2nA~±20mA, 8 ranges |
Measured current resolution: 0.1% of current range, lowest 100fA |
Input basis current: <20pA |
Experiments parameters: |
CV and LSV scan rate: 0.00001V/s~100V/s |
DPV and NPV pulse width: 0.001~10sec |
SWV frenquency:1~1kHz |
I-t sample interval: minimum 1ms |
IMP frequency: 0.001Hz~10kHz |
IMP amplitude: 0.001V~2.5V |
Software(electrochemical techniques) |
Open Circuit Potential (OCP) |
Potentiostatic (i-t curve) |
Galvanostatic |
Potentiodynamic (Tafel) |
Electrochemical noise (EN) |
Galvanic Corrosion measurement/Zero resistance Ammeter (ZRA) |
Linear sweep voltammetry (LSV) |
Cyclic voltammetry (CV) |
Staircase voltammetry (SCV) |
Differential pulse voltammetry (DPV) |
Normal Pulse Voltammetry (NPV) |
Square wave voltammetry (SWV) |
Stripping Voltammetry |
Differential Normal Pulse Voltammetry (DNPV) |
Differential Pulse Amperometry (DPA) |
Double Differential Pulse Amperometry (DDPA) |
Battery charge and discharge |
Constant current charge and discharge |
Suppliers with verified business licenses